HOW TO REMOVE EFFLORESCENCE FROM ACID-SENSITIVE SURFACES

Step-by-step instructions for marble, limestone, travertine, terrazzo, encaustic tiles, concrete, shellstone, saltillo and other acid-sensitive surfaces, from the team who make Sealers Plus Professional Grade products in Kurnell, NSW.

Problem solver · Efflorescence · No acids

Non-acidic: brush, pre-wet, scrub, rinse

Acid cleaners such as OxiTreat+ and Oxi Gel+ can etch and dull acid-sensitive surfaces, so they must never be used on them. Use 1. Eff-Ective+ (coming soon), our non-acidic efflorescence cleaner and inhibitor, or 2. MicroScrub, a ready-to-use, non-acidic Nano Cream cleaner that helps remove light efflorescence.

  • 1. Eff-Ective+ (coming soon): non-acidic efflorescence cleaner and inhibitor for all surfaces, including acid-sensitive stone
  • 2. MicroScrub: ready to use, non-acidic Nano Cream cleaner for light efflorescence
  • Dry-brush loose salts first. Don't wash them back in with lots of water
  • Don't let the product dry on the surface
  • Pick up with a wet vac, then rinse thoroughly
  • Always test first, especially on polished and dark surfaces
  • Never use OxiTreat+, Oxi Gel+ or other acids on these surfaces
COMING
SOON
1. EFF-ECTIVE+
Coming soon
MicroScrub 4 litre
2. MICROSCRUB
250 ml · 1 L
$51.00 View product

What is efflorescence, and why no acids?

Efflorescence is the white, powdery or crusty salt deposit that can appear on stone, tiles, grout and concrete. Water moving through cement-based materials such as grout, adhesive, screed, mortar and concrete dissolves natural salts and carries them to the surface. When the water evaporates, the salts are left behind.

Calcium-based surfaces such as marble, limestone, travertine, terrazzo and concrete react with acids. An acid efflorescence remover can etch, dull or discolour them permanently, so they need a non-acidic approach.

THE EFF-CONTROL+ SYSTEM: prevent with Eff-Shield+ in the grout, adhesive and screed of new installations, and remove with 1. Eff-Ective+ (coming soon) or 2. MicroScrub on acid-sensitive surfaces.

Efflorescence on honed travertine

Efflorescence on honed travertine

Suitable for

Where to use

  • Domestic: homes, units, duplexes etc
  • Commercial: hotels, shopping centres, restaurants, schools, aged care etc

Not for

What you'll need

  • 1. Eff-Ective+ (coming soon) or 2. MicroScrub
  • Soft broom, dustpan and vacuum for loose salts
  • Spray bottle or pump sprayer with clean water
  • Scrub'N'Clean Kit, white nylon pad or scrub brush
  • Grout brush for the joints
  • Wet vac (recommended) or mop
  • Plenty of clean water and cotton towels
  • Gloves, eye, skin and foot protection

Before you start

  • Always do a test area first
  • Surface temperature between 4°C and 32°C
  • Let the area dry out first so the salts are visible
  • Work out of direct sun and wind so the product doesn't dry
  • Take extra care on polished, dark coloured stone and dark grout
  • Keep children and pets away until the area is rinsed and dry

Step-by-step

Prepare → Treat → Remove + rinse
Dry-brush loose salts1Prepare

Dry-brush loose salts

Sweep, vacuum or wipe the surface and dry-brush off as much loose white salt as you can. Don't wash it back into the surface with lots of water.

Do a test area first2Prepare

Do a test area first

VERY IMPORTANT
Try the product on a small, hidden spot. Check colour stability, polish and dark grouts, and how well the efflorescence lifts.

Lightly pre-wet3Prepare

Lightly pre-wet

Slightly pre-wet the surface and grout joints with clean water. On walls, spray water from a spray bottle.

Apply MicroScrub4Treat

Apply MicroScrub

Pour approx. 1–2 cups of MicroScrub onto the pre-wet surface. On walls, apply it directly to a white nylon pad. Work in small sections.

Scrub5Treat

Scrub

Scrub the surface with a white nylon pad, scrub brush or scrub machine. Don't allow the product to dry on the surface.

Scrub the grout joints6Treat

Scrub the grout joints

Work the grout joints with a grout brush, where efflorescence usually starts.

Pick up and rinse7Remove + rinse

Pick up and rinse

Remove the dirty solution with a wet vac or mop, then rinse thoroughly with clean water and pick up the rinse water too.

Check when dry, repeat if needed8Remove + rinse

Check when dry, repeat if needed

Check the area once it is fully dry. Repeat as necessary. If it keeps coming back, find and fix the moisture source.

Which product? Try in this order

Order Product Use it for
1 Eff-Ective+ (coming soon) Non-acidic efflorescence cleaner and inhibitor for all surfaces, including acid-sensitive stone. Call us on +61 2 9521-4000 for availability.
2 MicroScrub Ready to use, non-acidic Nano Cream cleaner that helps remove light efflorescence. No dilution required.
Never OxiTreat+ · Oxi Gel+ Acid cleaners: only for acid-resistant surfaces. They can etch acid-sensitive surfaces.

Tips for the best result

  • Dry-brush loose salts first, and pick up all of the dirty solution: dissolved salts left behind can dry back to white
  • Work in small sections and never let the product dry on the surface
  • On polished and dark surfaces, check the test area once fully dry
  • New installations can keep pushing salts out while they cure: let them dry out, then treat
  • If efflorescence keeps coming back, have the installation checked for where the moisture is coming from (falls, drainage, waterproofing)
  • For other stains, see the Stain Removal Guide

Prevent it next time + aftercare

PRO TIP · EFFLORESCENCE CONTROL: add Eff-Shield+ to the screed, adhesive and grout of your next installation. This water-repellent admixture lines the pores of the cement to help reduce water uptake and the risk of efflorescence from within the mix. No VOC.
Aqua-Seal Gold+

For a natural look: seal porous surfaces with Aqua-Seal Gold+® once clean and completely dry, to help reduce water absorption and efflorescence.

Enhance'N'Seal

For a colour enhanced look: seal porous surfaces with Enhance'N'Seal instead. The colour change is permanent: always test first.

EzyClean+

EzyClean+: Daily / Weekly cleaning, pH neutral.

Stone Wash+

Stone Wash+: Quarterly deep clean for natural stone and terrazzo.

Aqua-Seal Gold+® and Enhance'N'Seal are for porous surfaces only: marble, limestone, travertine, terrazzo, encaustic tiles, concrete, shellstone and saltillo. Use the Product Selector to check the right sealer for your surface and finish.

Precautions

  • Read the entire label, SDS and technical bulletin before using
  • Wear appropriate skin and eye protection
  • Use when the surface temperature is between 4°C and 32°C
  • Do NOT use acid cleaners on acid-sensitive surfaces
  • Do not allow product to contact any non-recommended surfaces
  • Take care when using on dark coloured grout or stone
  • WASH UNDERSIDE OF SHOES BEFORE STEPPING ONTO OTHER AREAS.

Limitations

MicroScrub helps remove light efflorescence. It will not remove deep-set stains, etch marks or restore polish. Efflorescence is driven by moisture, so it can return until the moisture source is fixed.

For other stains and problems, see our Problem Solvers and the Stain Removal Guide.

For additional options, contact the Sealers Plus Technical Services Team at support@sealersplus.com.au or call +61 2 9521-4000 with details of the problem you are addressing.

Important note

These recommendations are general guidelines for problem solving. Actual dilution ratios and cleaning requirements may vary depending on the surface, the use, the amount and the method of application.
Read the entire Product Label, SDS and Technical Bulletin before using any product.
ALWAYS TEST A SMALL AREA to determine the ease of application, dilution, dwell time and desired results.
Keep the surface clean and dry to reduce the possibility of slip-fall accidents.
Chat on WhatsApp