AQUA-SEAL BRONZE

ECONOMICAL NATURAL LOOK SEALER

KEY FEATURES

• Good Stain Resistance Against Oil, Food & Grime;
  
• UV Resistant – Water Based – Inhibits Mould & Mildew;
  
• Non Coating – Non Yellowing – Non Toxic – Non Flammable;
• Low VOC Formula – Ideal for Interior, Exterior, Domestic & Commercial Use.

Aqua-Seal Bronze™ - Low VOC (<5gm/L) economical and cost effective, natural look, breathable, penetrating sealer. Provides good stain resistance against water, oil, grease, food & grime. Also use as a pre-grouting sealer. Water based, Safe, Non-Flammable, Non-Yellowing and UV Resistant. Helps inhibit Efflorescence, Mould & Mildew growth. Safe for food areas.

AVAILABLE SIZES:

• 1 LITRE
• 4 LITRE
• 15 LITRE
• 20 LITRE

IMPORTANT INFORMATION:

• HOW TO USE
  
• SDS
• TROUBLE SHOOTING GUIDE

MAINTENANCE

• EzyClean+ for routine, everyday cleaning & disinfecting;
  
• XtremeClean+ for heavy duty cleaning & disinfecting;
• Stone Wash+ for cleaning, conditioning & disinfecting;
• Stone Gel+ for cleaning & disinfecting vertical surfaces;
• ReFresh+ for food surface area cleaning and disinfecting;

WHERE TO USE:

For porous surfaces e.g. all natural stone like basalt, bluestone, granite, limestone, marble, quartzite, sandstone, slate, travertine etc plus porcelain tiles, encaustic tiles, terrazzo, concrete, pavers, saltillo, groutand other surfaces where a natural look and good stain and water resistance is required.

NOTE: For high traffic, commercial or food areas or where premium performance/stain resistance is required – for a natural look use AQUA-SEAL GOLD+ and for a colour enhanced, enriched look use ENHANCE’N’SEAL.

COVERAGE:

Approx 10-40m² per 1 litre per coat.  Will vary depending on the density, porosity, texture and absorption. Also weather conditions, application method and number of coats required. Full coverage chart at SURFACE FINDER
See table below as a guide (per 1L, per coat).